Manufacturer of Aluminium Enclosures For Electronics - OME Pump housing cover manufacturers – R&H

PRODUCT SPECIFICATION

PRODUCT FEATURE AND ADVANTAGE

Clockwise Rotation

PROLONG THE LIFE OF YOUR NEW PUMP BY TAKING THE TIME TO CHECK

FAN CLUTCH - (if equipped)- replace if there is an indication of fluid at shaft seal. Housing is damaged or broken. Noise or roughness can be detected when turning unit by hand, or when unit cannot be turned by hand. Tip of fan blade can be moved more than 1/4 inch front to rear. If the fan clutch bearing is worn out or if the fan clutch is damaged in any way, excessive loads produced by the imbalance can result in early water pump bearing failure or even water pump shaft damage.
FAN - replace if there are cracks, broken welds or loose rivets. Blades are bent or broken – NEVER BEND OR ATTEMPT TO STRAIGHTEN FAN. Imbalance in a fan can produce the same excessive loads as a damaged or worn fan clutch. Premature bearing failure or even water pump shaft damage can occur.
FAN BELT TENSION - Never adjust belts tighter than specified in the factory service manual. Excess tightening of belts running over the water pump pulley is the major cause of premature bearing failure and breaking of the bearing shaft or housing. On models equipped with automatic belt tensioners, be sure to inspect and test the operation of the tensioner prior to reusing. Most vehicle manufactures have testing procedures and/or specifications for these tensioners.

PACKAGING & PAYMENT TERMS & SHIPPING

1.Packaging Detail:
a.clear bags inner packing, cartons outer packing, then pallet.
b.as per customer’s demand for hardware stamping parts.

2.Payment:
T/T,30% deposits advance; 70% balance before delivery.

3.Shipping :
1.FedEx/DHL/UPS/TNT for samples, Door-to-Door;
2.By Air or by Sea for batch goods, for FCL;Airport/ Port receiving;
3.Customers specifying freight forwarders or negotiable shipping methods!
Delivery Time: 3-7 days for samples; 5-25 days for batch goods.

WHY CHOOSE US

FAQS

Q:Do you do the surface treatments please ?
A: yes, sure . we do the surface treatments ,for instance ; chromated, powder coating,Anodizing, laser etching as well as painting ;

FACTORY SHOW